Install My Brakes Make Some $$$$$$
#1
Install My Brakes Make Some $$$$$$
I just bought a brake package about a week ago. I'm looking for someone that is interested in making a little money for doing the install. It will just be a set of PowerSlot Rotors, Hawk pads and stainless brake lines. I was told the system should take about 2-3 hrs to install?
I would do it but don't trust my little experience. Red lights mean stop... Not Well I Almost Stopped!!!
Let me know if anyone is interested? I have my garage all ready to go......... Oh Yea, I have GOOD BEER TOO
------------------
Thanks,
Bill
Click here for my best strip time!
98 WS6, Nitto 315/35/17's,MAC Headders and Off Road Y-Pipe, Flowmaster American Thunder Catback, Vig 3200 Stall, TransGo Shift Kit, MTI Clear Lid, K&N Filter, TR55 NGK's, Taylor 8mm wires, EGR MOD & Other Free Mods. 12.84 @ 104.15 MPH 60ft 1.73.
I would do it but don't trust my little experience. Red lights mean stop... Not Well I Almost Stopped!!!
Let me know if anyone is interested? I have my garage all ready to go......... Oh Yea, I have GOOD BEER TOO
------------------
Thanks,
Bill
Click here for my best strip time!
98 WS6, Nitto 315/35/17's,MAC Headders and Off Road Y-Pipe, Flowmaster American Thunder Catback, Vig 3200 Stall, TransGo Shift Kit, MTI Clear Lid, K&N Filter, TR55 NGK's, Taylor 8mm wires, EGR MOD & Other Free Mods. 12.84 @ 104.15 MPH 60ft 1.73.
#2
how about $50 and your right foot to help bleed the brakes? let me know if interested. Im dealership tech. so no worries. I live in dearborn heights so about 30 min.s away. my gar. is ready to go too.
------------------
1986 Iroc Z
355, ported camel hump heads,750 holley, 700r4, 10.5 compr., forged flat tops, solidcam .501I .510E, 4gen rear w/3:73 posi, girdle, and disc's, Edel. torker II, shift kit, 3500 stal, hedmann LT. headers, 4 gen seats, man. strg., lt1 starter, alum. w/p, msd 6al, coil, dist., mallory wires.13.34 @102mph best w/that combo. have trick flow heads and tighter conv. to put in currently.
1995 z28,SS Hood, Iroc style spoiler, tints and black outs, 700r4,2400 act. stall speed,B&M hammer shifter, 17" budnick trilogy III wheels, 275/40 ZR17, 160 stat, man. cooling fan sw., homemaid CAI,1LE elbow, hypertech airfoil, t.b.bypass,!cat, flowmaster, !maf screen, relocated batt., 1LE front l.c.a.s', poly trans and torq.arm bushings, MSD 6AL, custom program, p&p maf, accel coil, and under drive pulley
mods that i have, just not on car yet:
msd wires, edelbrock mid. headers, edelbrock rpm catback
------------------
1986 Iroc Z
355, ported camel hump heads,750 holley, 700r4, 10.5 compr., forged flat tops, solidcam .501I .510E, 4gen rear w/3:73 posi, girdle, and disc's, Edel. torker II, shift kit, 3500 stal, hedmann LT. headers, 4 gen seats, man. strg., lt1 starter, alum. w/p, msd 6al, coil, dist., mallory wires.13.34 @102mph best w/that combo. have trick flow heads and tighter conv. to put in currently.
1995 z28,SS Hood, Iroc style spoiler, tints and black outs, 700r4,2400 act. stall speed,B&M hammer shifter, 17" budnick trilogy III wheels, 275/40 ZR17, 160 stat, man. cooling fan sw., homemaid CAI,1LE elbow, hypertech airfoil, t.b.bypass,!cat, flowmaster, !maf screen, relocated batt., 1LE front l.c.a.s', poly trans and torq.arm bushings, MSD 6AL, custom program, p&p maf, accel coil, and under drive pulley
mods that i have, just not on car yet:
msd wires, edelbrock mid. headers, edelbrock rpm catback
#3
Just out of curiousity what dealership do you work at ? It's a chevy dealer I assume.
------------------
Eddie R. "Much clown luv!"
I have some mods too!
Yahoo: CrackerBalls95
AIM: CrackerBalls95 ICQ: 1651571
------------------
Eddie R. "Much clown luv!"
I have some mods too!
Yahoo: CrackerBalls95
AIM: CrackerBalls95 ICQ: 1651571
#4
<font face="Verdana, Arial" size="2">Originally posted by Eddie95Z28:
Just out of curiousity what dealership do you work at ? It's a chevy dealer I assume.
</font>
Just out of curiousity what dealership do you work at ? It's a chevy dealer I assume.
</font>
Bob Sellers Pont./GMC in farmington hills.
chris
#5
If that doesn't work out with Chris, let me know, Andy (rediroc) is also a GM tech & is very qualified to do the job.
How about doing a test before switching the brakes. Get on the highway, with no trafic, get the car up to 60, at at a pre determned spot, brake as hard as you can. Mark the spot you stop at with spray paint or something, then do the same thing after you switch brakes. I'd be interested how much you shorten your stopping distance with those brakes. Good luck.
------------------
hchap63@hotmail.com
01/SS, Black A4, TR224/112, ARE stage 2 heads, lid, FTRA, PMAF, PTB, Grott LT, true duals, NGK, ASP pulley, Vig 3200, LCA, poly TAB, Convo pros, ET Streets, 3300 raceweight. Little bit of juice..
Best ET: (All bolt ons) 11.496@116.42 (1.52)
Current best after Head & cam & nitrous:
10.88@124 (1.60)
Motown Muscle King of The Hill winner 6-8-02. Want some? Get some!!
RIP #3 Dirty Dale!!!
How about doing a test before switching the brakes. Get on the highway, with no trafic, get the car up to 60, at at a pre determned spot, brake as hard as you can. Mark the spot you stop at with spray paint or something, then do the same thing after you switch brakes. I'd be interested how much you shorten your stopping distance with those brakes. Good luck.
------------------
hchap63@hotmail.com
01/SS, Black A4, TR224/112, ARE stage 2 heads, lid, FTRA, PMAF, PTB, Grott LT, true duals, NGK, ASP pulley, Vig 3200, LCA, poly TAB, Convo pros, ET Streets, 3300 raceweight. Little bit of juice..
Best ET: (All bolt ons) 11.496@116.42 (1.52)
Current best after Head & cam & nitrous:
10.88@124 (1.60)
Motown Muscle King of The Hill winner 6-8-02. Want some? Get some!!
RIP #3 Dirty Dale!!!
#6
<font face="Verdana, Arial" size="2">Originally posted by IrocSS85:
how about $50 and your right foot to help bleed the brakes? let me know if interested. Im dealership tech. so no worries. I live in dearborn heights so about 30 min.s away. my gar. is ready to go too.
</font>
how about $50 and your right foot to help bleed the brakes? let me know if interested. Im dealership tech. so no worries. I live in dearborn heights so about 30 min.s away. my gar. is ready to go too.
</font>
Let me know?
------------------
Thanks,
Bill
Click here for my best strip time!
98 WS6, Nitto 315/35/17's,MAC Headders and Off Road Y-Pipe, Flowmaster American Thunder Catback, Vig 3200 Stall, TransGo Shift Kit, MTI Clear Lid, K&N Filter, TR55 NGK's, Taylor 8mm wires, EGR MOD & Other Free Mods. 12.84 @ 104.15 MPH 60ft 1.73.
#7
Black Sunshine,
I don't think the new rotors and pads will lessen the stopping distance more than the variability that would be there from a driver trying to hit his brakes at the very same point both times.
I have a Vericom and GTech that might make the test more accurate if Bill's interested.
I don't think the new rotors and pads will lessen the stopping distance more than the variability that would be there from a driver trying to hit his brakes at the very same point both times.
I have a Vericom and GTech that might make the test more accurate if Bill's interested.
#8
<font face="Verdana, Arial" size="2">Originally posted by 94bird:
Black Sunshine,
I don't think the new rotors and pads will lessen the stopping distance more than the variability that would be there from a driver trying to hit his brakes at the very same point both times.
I have a Vericom and GTech that might make the test more accurate if Bill's interested.
</font>
Black Sunshine,
I don't think the new rotors and pads will lessen the stopping distance more than the variability that would be there from a driver trying to hit his brakes at the very same point both times.
I have a Vericom and GTech that might make the test more accurate if Bill's interested.
</font>
Thanks for the offer.
------------------
Thanks,
Bill
Click here for my best strip time!
98 WS6, Nitto 315/35/17's,MAC Headders and Off Road Y-Pipe, Flowmaster American Thunder Catback, Vig 3200 Stall, TransGo Shift Kit, MTI Clear Lid, K&N Filter, TR55 NGK's, Taylor 8mm wires, EGR MOD & Other Free Mods. 12.84 @ 104.15 MPH 60ft 1.73.
#9
well bill, I would but Im going to be gone this weekend. takingmy dads mecham TA down to the TA nats in dayton. leaving at 6am tomrrow and coming home sun. evening. if yo udont have them done over the weekend, let me know and I'll either come out to you or you can come here. later chris
#10
I thought that if he kept turning around & trying over & over, then sooner or later he would hit the brakes at the same spot
I'd be interested in any results that you get, regardless of testing method. Good luck.
I'd be interested in any results that you get, regardless of testing method. Good luck.
Thread
Thread Starter
Forum
Replies
Last Post
F'n1996Z28SS
Cars For Sale
8
08-23-2023 11:19 PM
chevroletfreak
LT1 Based Engine Tech
202
07-04-2005 05:00 PM