FS: 1997 Camaro SS Convertible Project
#1
FS: 1997 Camaro SS Convertible Project
Guys,
I have a 1997 30th anniversary Camaro SS convertible project car for sale. Its been sitting for 2 years and I still can't find time to finish it... and to top it off im getting married and trying to buy a house. So... it's gotta go. I'll try and get some pics in the next few days...
Here's the specs:
Engine:
355 LT4 w/ATI P1SC (0 miles on it)
- LT4 Heads
- ARP Head Studs
- LT4 Intake
- LT4 Timing set
- Milodon splayed 4 bolt main
- ARP Main Studs
- Forged GM performance Crank
- Eagle Forged ESP Rods
- Wiseco Custom Forged Pistons (8 to 1 Compression Ratio)
- GM Performance 846 cam
- Comp Cams Hi-Tech one-piece Chromemoly Pushrods
- Crane Lifters
- ATI Super Damper
- Canton Oil Pan
- Aeromotive Fuel Pressure Regulator
- MSD Blaster Coil
- ATI Procharger P1SC w/ twin Intercoolers
- Racetronix Fuel pump
- 52lb injectors
- GM Opti
- JET hot Long tube coated headers
- True Duels all the way back out the rear
Drive Line:
- New T56 6 Speed
- Mcleod Twin Disc Clutch
- 4:10 Rear
- Aluminum Drive Shaft
Chassis:
- Corvette C5 Front Brakes
- New wheel bearings
- New front and rear shocks
- H & R Lowering Springs
- BMR Tubular Control Arms
- BMR Panhard Rod Relocation Kit
- BMR Adjustable Panhard Rod
- Spohn Tubular Adjustable Torque Arm
- New Ball Joints
- Energy Suspension Full Suspension Bushing set
Body:
- Wolf 6 point roll bar w/ swing-outs
- SLP SS Hood, Spoiler
- Convertible
- White w/ white Leather
- Hugger Orange SS Stripes
- White 2000 SS wheels
- 52k miles on it
Asking: $9000 / OBO
I know I could part it out for more... But I just don't have the time or place to do it. Someone can finish it and have on Bad @ss car or part it out and make a few bucks...
If interested Please call me at (248) 494-3305 or email me at jayviphone@yahoo.com
Thanks,
Jay
I have a 1997 30th anniversary Camaro SS convertible project car for sale. Its been sitting for 2 years and I still can't find time to finish it... and to top it off im getting married and trying to buy a house. So... it's gotta go. I'll try and get some pics in the next few days...
Here's the specs:
Engine:
355 LT4 w/ATI P1SC (0 miles on it)
- LT4 Heads
- ARP Head Studs
- LT4 Intake
- LT4 Timing set
- Milodon splayed 4 bolt main
- ARP Main Studs
- Forged GM performance Crank
- Eagle Forged ESP Rods
- Wiseco Custom Forged Pistons (8 to 1 Compression Ratio)
- GM Performance 846 cam
- Comp Cams Hi-Tech one-piece Chromemoly Pushrods
- Crane Lifters
- ATI Super Damper
- Canton Oil Pan
- Aeromotive Fuel Pressure Regulator
- MSD Blaster Coil
- ATI Procharger P1SC w/ twin Intercoolers
- Racetronix Fuel pump
- 52lb injectors
- GM Opti
- JET hot Long tube coated headers
- True Duels all the way back out the rear
Drive Line:
- New T56 6 Speed
- Mcleod Twin Disc Clutch
- 4:10 Rear
- Aluminum Drive Shaft
Chassis:
- Corvette C5 Front Brakes
- New wheel bearings
- New front and rear shocks
- H & R Lowering Springs
- BMR Tubular Control Arms
- BMR Panhard Rod Relocation Kit
- BMR Adjustable Panhard Rod
- Spohn Tubular Adjustable Torque Arm
- New Ball Joints
- Energy Suspension Full Suspension Bushing set
Body:
- Wolf 6 point roll bar w/ swing-outs
- SLP SS Hood, Spoiler
- Convertible
- White w/ white Leather
- Hugger Orange SS Stripes
- White 2000 SS wheels
- 52k miles on it
Asking: $9000 / OBO
I know I could part it out for more... But I just don't have the time or place to do it. Someone can finish it and have on Bad @ss car or part it out and make a few bucks...
If interested Please call me at (248) 494-3305 or email me at jayviphone@yahoo.com
Thanks,
Jay
Last edited by CamaroSS30th; 07-15-2008 at 05:50 PM.
#4
Dan,
I would part the SC if I have someone lined up to buy the rest of the car for $7000... Let me know if you know anyone who might be interested in the rest of the car and maybe we could work something out.
Thanks,
Jay
I would part the SC if I have someone lined up to buy the rest of the car for $7000... Let me know if you know anyone who might be interested in the rest of the car and maybe we could work something out.
Thanks,
Jay
#8
if i wasnt buying a house also and having a kid id be all over this! its the car i was looking for when i bought my plain 97 camaro SS vert white on white
*edit* im going to put my SS out there and try and sell it to buy this one
*edit* im going to put my SS out there and try and sell it to buy this one
Last edited by 97SS0594; 07-18-2008 at 09:15 PM.
#10
I helped build this car and it is very clean, Jay has owned it practically since it was new. He is one of my best friends and I will vouch for the car. It does, however, have a 3.73 rear that was supposed to go in my car but this peckerhead took it back after I spent the time wire wheeling it and coating it with POR-15 I have a bunch of pictures from when we built this thing, pics of the engine on the stand, the car completely stripped down, etc.
#11
I would be interested in this stuff if u part it. I am local too.
- BMR Tubular Control Arms
- BMR Panhard Rod Relocation Kit
- BMR Adjustable Panhard Rod
- Spohn Tubular Adjustable Torque Arm
- Hood
- Wheels
- wolf roll bar
- True duals
JD
- BMR Tubular Control Arms
- BMR Panhard Rod Relocation Kit
- BMR Adjustable Panhard Rod
- Spohn Tubular Adjustable Torque Arm
- Hood
- Wheels
- wolf roll bar
- True duals
JD
#12
Sorry dood, I got dibs on all of the suspension if its parted out
#14