Local guys get first shot.

Lucas Delphi from Racetronix 42.5 pound injectors. Ran them for less then 1500 miles. Need to go smaller. Paid 320.00, sell for 225.00

Autometer Pro Comp 3 3/4 inch non lighted tach with recall switch. Nice tach, and I will include the mounting stuff I have with it. 125.00

Set of 15 inch Autodrag satin finish wheels with a set of well used 28 inch ET Drags on them. They are back spaced for a third or second gen. They fit a 4th gen, but stick way the hell out. Good set of wheels, and you could realisitcly use them quit a few more times before they need tires. Quite a few of the local members have bolted them on and burned them down the track. 200.00

Complete gear swap for a 4th gen. I have a 4.10 US Gear ring and pinion, a complete bearing setup, the additive and a brand new eaton posi. Everything you need to set up a 4th gen with a new rear end. I will not split this up, and will let the whole thing go for 500 bucks. Thats all the bearings and races including new axle bearings and seals, carrier bearings and pinion bearing and seals as well as the crush sleave and the GM additive for the posi.

Eagle 077 wheels with tires. The tires are going to need replacing soon, but I wouldnt hesitate to jump in the car and run to Florida on them. Wheels are in good shape, few scratches, but nothing you can see without staring right at it. Nice wheels, 16 inch, but I found something else I want. 450.00

Also have a set of Chrome wheels for a 2nd or third gen. I dont have a picture right now, but will get one tomorrow. They came off my buddies 79 Z/28. They are a uni lug, and come with the caps. Really nice set of 17 inch wheels. Tires at so so, and they are Kumos if I remember right. 500 bucks and they are yours. No trades on this one.

Give you guys a 1 week jump before I post it all up in the for sale section.


And yes, I can take paypal. Delivery is up to you, but with so many people throughout the state I am sure we can figure something out.

Only interested in trades that involve QA1's or Nitrous stuff.

 

I am not joking when I say I still have rubber on my car from that day... It will NOT come off I may be interested in these... I need to come up with some money.

 

Why would you need to go smaller on your injector size when the ECM/PCM can be recalibrated for the 42's?

 

BUMP

 

Dreamer you know that the injectors are mine. Right?

 

Yepper, they are all yours Al.

Q

 

does that rear end set up come with new axles?

 

I might be interested in the rear end set up...i'm looking for a new one. How much of a diff will i notice mileage wise between a 3.73, and a 4.10? Thanks

 

OMG i doubt he still has it as this post was from 2003. lol. talk about bringing something out of the grave.

 

HAHA, yeah this stuff is LONG gone. Hell, I have a season on the new parts already Sorry guys, go fish