Did i get a good deal
Thread Starter
Registered User
Joined: Jun 2002
Posts: 67
From: roseville,mi u.s.
Did i get a good deal
I just won the rear spoiler for my car off of e-bay for $285 it is a hard to find peice so i hope not plus I only need the center peice so if anyone knows anyone that needs the side peices to the rear spoiler let me know.
------------------
91 camaroZ28 convertible
rebuilt 350
flomaster cat-back
holley intake\carb
crane cam\lifters
"I LIVE MY LIFE A QUARTER-MILE AT A TIME"
------------------
91 camaroZ28 convertible
rebuilt 350
flomaster cat-back
holley intake\carb
crane cam\lifters
"I LIVE MY LIFE A QUARTER-MILE AT A TIME"
Registered User
Joined: Nov 2000
Posts: 1,541
From: Sterling Heights, MI
I myself wouldn't have paid that much, but if you need it and thats the only place you could find it then I guess you did what you had to do.
Did you try any of the sponsors on www.thirdgen.org ? I am sure they could have come up with one, but who knows what they're selling for?
------------------
Mike L.
1987 IROC Z 5.7 TPI A4 3.27 Borg-Warner four wheel disc
Mods: 2300-2500 Stall Converter, Shift Kit(GM parts), TPI Specialties Stage 3 PROM, Modified airbox w/ K&N's, Relocated MAT sensor, Gutted MAF, 160* thermostat, MSD 6A, Accel 8mm Wires, bypassed TB coolant, 3" Flowmaster 3 chamber single outlet, custom adjustable cutout, 3" MAC mandrel intermediate, airfoil, ported plenum. !smog, Crane AFPR, Accel rail mounted FP gauge, Harlan shiftlite, 24lb. injectors, Hedman headers, a few others I forgot...??? FINALLY GOT PAINT!!
Check out my IROC webpage!
Did you try any of the sponsors on www.thirdgen.org ? I am sure they could have come up with one, but who knows what they're selling for?
------------------
Mike L.
1987 IROC Z 5.7 TPI A4 3.27 Borg-Warner four wheel disc
Mods: 2300-2500 Stall Converter, Shift Kit(GM parts), TPI Specialties Stage 3 PROM, Modified airbox w/ K&N's, Relocated MAT sensor, Gutted MAF, 160* thermostat, MSD 6A, Accel 8mm Wires, bypassed TB coolant, 3" Flowmaster 3 chamber single outlet, custom adjustable cutout, 3" MAC mandrel intermediate, airfoil, ported plenum. !smog, Crane AFPR, Accel rail mounted FP gauge, Harlan shiftlite, 24lb. injectors, Hedman headers, a few others I forgot...??? FINALLY GOT PAINT!!
Check out my IROC webpage!
Registered User
Joined: May 2002
Posts: 824
From: St.Johns MI
J,
I think you got a fairly decent deal.The cheapest I have ever seen them go for is around $300. It sucks that alot of the parts are specific to the convertibles which in turn drives the price sky high!!!! All in all I think you did OK.Just pray to God that you never have to buy a decklid for your ride.You would die if you knew how much those cost.
James
------------------
91 Z-28 Convertible 305 H.O. 210 RWHP
crane hi-6,holley reg,air foil,3:73 richmonds,Ed Wright stage 2 chip,msd wires,SLP headers,best e.t 14.4@99.02mph
91 Mustang 5.0 LX Convertible. A4, FMS 9mm plug wires, Denso Plugs.Best E.T. 16.097 @ 86.89mph.Best 60 ft 2.4
(Retired 1995 S-10 Blazer 4X4, 230,000 Mi
Leland RD burnout Champ!!!)
I think you got a fairly decent deal.The cheapest I have ever seen them go for is around $300. It sucks that alot of the parts are specific to the convertibles which in turn drives the price sky high!!!! All in all I think you did OK.Just pray to God that you never have to buy a decklid for your ride.You would die if you knew how much those cost.
James
------------------
91 Z-28 Convertible 305 H.O. 210 RWHP
crane hi-6,holley reg,air foil,3:73 richmonds,Ed Wright stage 2 chip,msd wires,SLP headers,best e.t 14.4@99.02mph
91 Mustang 5.0 LX Convertible. A4, FMS 9mm plug wires, Denso Plugs.Best E.T. 16.097 @ 86.89mph.Best 60 ft 2.4
(Retired 1995 S-10 Blazer 4X4, 230,000 Mi
Leland RD burnout Champ!!!)
Thread Starter
Registered User
Joined: Jun 2002
Posts: 67
From: roseville,mi u.s.
Actually you would be suprised 
the same guy was selling one of those too and it was goin pretty cheap
~Joe
------------------
91 camaroZ28 convertible
rebuilt 350
flomaster cat-back
holley intake\carb
crane cam\lifters
"I LIVE MY LIFE A QUARTER-MILE AT A TIME"
the same guy was selling one of those too and it was goin pretty cheap~Joe
------------------
91 camaroZ28 convertible
rebuilt 350
flomaster cat-back
holley intake\carb
crane cam\lifters
"I LIVE MY LIFE A QUARTER-MILE AT A TIME"
Thread Starter
Registered User
Joined: Jun 2002
Posts: 67
From: roseville,mi u.s.
The eone on ebay went for about $400 I guess that was pretty cheap.
------------------
91 camaroZ28 convertible
rebuilt 350
flomaster cat-back
holley intake\carb
crane cam\lifters
"I LIVE MY LIFE A QUARTER-MILE AT A TIME"
------------------
91 camaroZ28 convertible
rebuilt 350
flomaster cat-back
holley intake\carb
crane cam\lifters
"I LIVE MY LIFE A QUARTER-MILE AT A TIME"
Thread
Thread Starter
Forum
Replies
Last Post
Brandon Wittmer
General 1967-2002 F-Body Tech
0
Dec 8, 2014 07:53 PM
lbrowne
Car Audio and Electronics
2
Aug 22, 2002 06:21 PM