After the holidays I will be installing a cam, pushrods, springs / retainers, nitrous kit, 3.73 10-bolt, Yank PT4400 and other stuff.

I am looking for help in the cam/ stall department, I know a few of you have done them so lets start a list of who can help with what. I will be buying food and beverages/ beer of your choice.

Cam is a Thunder 224-226-114, 918 springs /TI retainers and most of the TNT kit is already installed.

 

Any idea what day you are thinking of? My motor should be coming out soon, but if you are thinking about right after New Years, then I'm in.

I hope you have heat Also there are a few tools that you will need, such as the coupler that screws into the spark plug hole, to keep the valves up while you are changing the springs. Also there is supposed to be a bad a$$ spring compressor tool from More Performance (look in your GMHTP for their #).

Just give me a date. It's gonna take a day, although some claim to do it in 3 hrs, that's a myth. You've got my #, call me. Happy Holidays.

 

I may be able to help depending on the day. At the very least I have an air compressor with the plug fitting and a decent spring compressor that I used for my install. Keep us posted on the day.

Brandon

 

checkout this web site its got pic's tool list and step by step instructions.

http://www.ls1info.com/cam_install/