1991 Z28 with HSR for sale locally
09-19-2003, 05:20 AM
#1
Registered User
Thread Starter
Join Date: Nov 2001
Location: Pontiac, Mi USA
Posts: 13
1991 Z28 with HSR for sale locally
Check out the link:
http://www.dataii.com/auto/AutoDetail.php?AutoID=6370
Priced accordingly no deals, no trades. I have more pics.
1991 Chevy Camaro Z28 with 99,998 miles with a 406 small block chevy with the Holley Stealth Ram TPI intake and 30lb Accel injectors, Holley 255L fuel pump and holley adjustable fuel pressure regulator, Maxi cool oil cooler, SLP 1 3/4" headers, Th350 trans built up, with TCI 2800 stall, Sphon adjustable torque arm, also Sphon 3" driveshaft, lakewood lower control arms, and panhard rod. Sportsman II stage two ported heads with summit 1.6 roller rocker arms, Comp Cam grind number CS 280H-R10 (224 @.05 .525I .525E LSA 110), MSD 6A ignition with MSD wires and Accel plugs. No a.i.r no a/c, no cats, no radio included. Also B&M star shifter with Flowmaster exhaust out back. New radiator, new starter, new battery, some stainless steel braided lines on oil/trans cooler modified chip for new set-up will also include stock chip. Also new rear rotors and pads, with new Chevy valve covers, timing chain cover and oil pan. Asking $4000
http://www.dataii.com/auto/AutoDetail.php?AutoID=6370
Priced accordingly no deals, no trades. I have more pics.
1991 Chevy Camaro Z28 with 99,998 miles with a 406 small block chevy with the Holley Stealth Ram TPI intake and 30lb Accel injectors, Holley 255L fuel pump and holley adjustable fuel pressure regulator, Maxi cool oil cooler, SLP 1 3/4" headers, Th350 trans built up, with TCI 2800 stall, Sphon adjustable torque arm, also Sphon 3" driveshaft, lakewood lower control arms, and panhard rod. Sportsman II stage two ported heads with summit 1.6 roller rocker arms, Comp Cam grind number CS 280H-R10 (224 @.05 .525I .525E LSA 110), MSD 6A ignition with MSD wires and Accel plugs. No a.i.r no a/c, no cats, no radio included. Also B&M star shifter with Flowmaster exhaust out back. New radiator, new starter, new battery, some stainless steel braided lines on oil/trans cooler modified chip for new set-up will also include stock chip. Also new rear rotors and pads, with new Chevy valve covers, timing chain cover and oil pan. Asking $4000
Last edited by Cam28_boy; 09-19-2003 at 05:27 AM.
09-21-2003, 07:52 PM
#5
Registered User
Join Date: Nov 2000
Location: MI
Posts: 3,978
still waiting..... 
have to admit the rust on the car along with the few other things you can see in that bad picture makes me very worried but if everything else is good and the body can be fixed i'd like to see it.
have to admit the rust on the car along with the few other things you can see in that bad picture makes me very worried but if everything else is good and the body can be fixed i'd like to see it.
09-22-2003, 04:40 AM
#6
Registered User
Thread Starter
Join Date: Nov 2001
Location: Pontiac, Mi USA
Posts: 13
bad rust where kandied91z? There is surface rust on some of the wheel wells but that it surface rust that can be sanded. The car has not been painted since i've had it. If I was going to paint it and make it look spotless then it would have to sell for more money, it has no major dents. I stay in Pontiac and I have done all of the work myself, except burn the chip.
Thread
Thread Starter
Forum
Replies
Last Post
mspennyhughes
South Atlantic
0
11-28-2014 03:22 PM