Z06 Clutch in 01 SS?
06-25-2003, 09:40 AM
#1
Registered User
Thread Starter
Join Date: Dec 2002
Location: Cleveland, OH
Posts: 179
Z06 Clutch in 01 SS?
I heard at the track last night that you can take a stock Z06 Vette clutch and pressure plate and put it in my 2001 Camaro SS M6...
Seeing as how the clutch in there is fried and I dont want to go with a crappy stock clutch that came in the SS, WOULD I be able to do this?? just get a clutch setup from a Z06 and put it in??
Please let me know, either that or waht a decent aftermarket clutch is that isnt going to cost me 800 some dollars.
Seeing as how the clutch in there is fried and I dont want to go with a crappy stock clutch that came in the SS, WOULD I be able to do this?? just get a clutch setup from a Z06 and put it in??
Please let me know, either that or waht a decent aftermarket clutch is that isnt going to cost me 800 some dollars.
06-25-2003, 02:02 PM
#3
Registered User
Thread Starter
Join Date: Dec 2002
Location: Cleveland, OH
Posts: 179
Stock 'cept for ported MAFs, SLP LT's, 3" Y, 3" flowmaster catback.
So yah pretty much stock, should not have had enough power to F up the rear end OR the clutch, but... Oh yeah.. track 1-2 tmes a month, and launch at 1300-1500rpm... never any higher (STREET tires only)
So yah pretty much stock, should not have had enough power to F up the rear end OR the clutch, but... Oh yeah.. track 1-2 tmes a month, and launch at 1300-1500rpm... never any higher (STREET tires only)
hmmm k
Thread
Thread Starter
Forum
Replies
Last Post