Alt. are very easy to polish, basically the same as porting only keep going finer with the sand paper, then hit a polishing wheel. As for the water pump, for some reason they must use lower grade alum. I did a few and there were allot of air pockets and inperfections although I've seen a WP housing and elec. housing polished and that looked very impressive! I had polished my housing, but it was such a PITA to keep clean plus you can't see it under the elbow, so I ended up going with paint when I did the elec. pump. That would be painted BLACK, the color of the FASTEST RACE CARS!

If you want to take a shot at polishing I have allot of the various abrasives and wheels I can bring over and we can do it.

 

GREEN cars are fast too!!

 

I MUST agree with Ron's comment...

Black > Dale Earnhardt = enough said.

Black; "Intimidating", sinister, stealth, mean, nasty, etc., etc.


Red; Red is for girls!!! J/K!!!!!

 

Red sucks now... why? BECAUSE IT DOESNT FIT!!!!!!!!!

I tried to bolt it up last night. It doesnt fit. I guess the .010 of the deck and the .039 gasket on the TFS head was too much. I think I have to hae it milled. I hate to do that but it might have to be done.

 

Yah, but at least you found out now instead of having to chase a leak later!

Ron is gettng pretty good with the sawsall mods, maybe he can come over a trim it for you......

 

I have a my own Rigid with new hacking blades of various lengths, a whole dremel tool set, cutting / grind wheels for the circular saw and a brand new chain on the chain saw. Whadda ya need "trimmed"?
Bahahahahhaa....

 

Leak... hell the bolt holes dont even line up. thats a pretty major leak.

 

John likes using that RTV silcone stuff...

 

How many of these do you need Bri? I made two so far.....

 

lol, I will need a total of 12