I will be heading out with a f-bod guy and was curious to know if anyone else is going?

Trying to work out some gremlins in my combo. I think if I can work them out I mid get mid 11's hopefully.

------------------
1996 Z28 Camaro
2001 best 1/4 BFG DR's NA - 11.865@113.57 w/1.634 60', 1/8 - 7.563@89.82mph Best 1/4 MPH 114.82 - Best 1/8 MPH 90.73 - 2002 Mid 11's NA, Mid 10's n2o

1989 GMC 1500 truck for work 18.1@73 305
8 cats to feed clean after 1999 V6 Mustang 5 speed
15.358@89.47 MPH w/ 2.227 60'
15.364@90.92 MPH w/ 2.383 60'

 

Wish I could go but I have to work. School starts in a couple weeks though and I will be sure to hit up the track with the cold weather on the way.

------------------
Ryan
Factory Slow, auto (2.73) Chrome ZR1's
Mods=FLP's, CAI, Borla's, MAF, STB, Accel 300+
13.7 @ 102 w/ 2.1 60'

 

Sooner or later we will hook up and meet.

Anyone, nice weather today?

------------------
1996 Z28 Camaro
2001 best 1/4 BFG DR's NA - 11.865@113.57 w/1.634 60', 1/8 - 7.563@89.82mph Best 1/4 MPH 114.82 - Best 1/8 MPH 90.73 - 2002 Mid 11's NA, Mid 10's n2o

1989 GMC 1500 truck for work 18.1@73 305
8 cats to feed clean after 1999 V6 Mustang 5 speed
15.358@89.47 MPH w/ 2.227 60'
15.364@90.92 MPH w/ 2.383 60'

 

It was fun. I got some new times last night

12.616 @ 110.33mph with a 60ft time of 1.869. So low 12s aren't that far out of the question for me. I have relocation brackets and subframe connectors that I bought a year ago but never got round to putting them on. I should put them on this week and get a cut-out as well.

------------------
Green 1995 Z28, 6-Speed
Best ET: 12.825 @ 109.24mph 60ft: 2.043 (Half of clutch disk missing and blown posi)
3430lbs race weight

 

Your car is running great Waswa.

I am going to be replacing my intank fuel pump and start logging my runs to see what is going on.

------------------
1996 Z28 Camaro
2001 best 1/4 BFG DR's NA - 11.865@113.57 w/1.634 60', 1/8 - 7.563@89.82mph Best 1/4 MPH 114.82 - Best 1/8 MPH 90.73 - 2002 Mid 11's NA, Mid 10's n2o

1989 GMC 1500 truck for work 18.1@73 305
8 cats to feed clean after 1999 V6 Mustang 5 speed
15.358@89.47 MPH w/ 2.227 60'
15.364@90.92 MPH w/ 2.383 60'

 

12.6!!! damn! i really need to get my sh*t worked out, last time i went to the track my best was a 13.5 @ 106 w/ 2.3 60 ft. im going out to thompson tomorrow for ford vs. chevy day, hopefully i can see some better times since putting in the walbro intank pump and hopefully having some better weather, it was 92 and humid as hell when i ran the 13.5 a few weeks ago

------------------
1995 Polo Green Z28 M6, T-Tops, Blueprinted 355 cid, 11.8:1 comp., JE Forged Pistons, GMPP Forged Steel Crank, Meziere, Star Stage 3 Kevlar, BBK 58MM, 1 3/4" Hooker LT's with Mufflex Y Pipe, LT4 Hotcam Kit, Mildly Ported Heads, K&N CAI, Flowmaster AT, QTP E-Cutout, Walbro FP, and a ton of other stuff.....

12.931 @ 109.073 w/2.084 60ft. with bad traction and clutch slipping bad through 1st and 2nd
343rwhp/348rwtq (old motor)

no new times or dyno #s with new motor

LS1 ft. brakes and LS1 DS waiting to install

 

well ive made a little progress, todays best was a 13.3 @ 107 with a 2.2 60 ft. weather today was pretty similar to the last time i went, high 80s, i really need to dyno the car and see what i need to do, oh well, ill get it figured out soon enough

------------------
1995 Polo Green Z28 M6, T-Tops, Blueprinted 355 cid, 11.8:1 comp., JE Forged Pistons, GMPP Forged Steel Crank, Meziere, Star Stage 3 Kevlar, BBK 58MM, 1 3/4" Hooker LT's with Mufflex Y Pipe, LT4 Hotcam Kit, Mildly Ported Heads, K&N CAI, Flowmaster AT, QTP E-Cutout, Walbro FP, and a ton of other stuff.....

12.931 @ 109.073 w/2.084 60ft. with bad traction and clutch slipping bad through 1st and 2nd
343rwhp/348rwtq (old motor)

no new times or dyno #s with new motor

LS1 ft. brakes and LS1 DS waiting to install