Middle Atlantic New Jersey, New York, and Pennsylvania

17x11/17x7 "SS" wheels FS in NJ

Thread Tools
 
Search this Thread
 
Old Dec 5, 2002 | 11:11 AM
  #1  
Injuneer's Avatar
Thread Starter
Administrator
 
Joined: Nov 1998
Posts: 71,119
From: Hell was full so they sent me to NJ
17x11/17x7 "SS" wheels FS in NJ

I have been asked by George Baxter to sell the "street" wheels off his 9.04-sec/155mph 30th SS Convertible...... yes he actually drove that thing on the street!!

Front Wheels/Tires:

OEM GM 17x9" SS wheels, narrowed to approx 7" wide ("skinnies"), by Vaugh Machine in Monrovia, CA. They are painted white/"SS" center caps. Tires are Pirelli P-Zero 205/50-17. Less than 1K miles on tires.

You can see the "fronts" in this pic:

FRONTS IN ACTION

Rear Wheels/Tires:

OEM GM 17x11 Grand Sport wheels, painted white/"SS" center caps. Correct offset for minimum interference on 4th Gen F-Body. Tires are BFG Comp T/A 315/35-17 (blems). Less than 1K miles on the tires.

Condition of the wheels is believed to be very good..... I have not personally seen them for at least a year, because his car has been in the shop for at least that long, for a new engine, weight reduction. I can make no guarantees regarding the wheels or tires.... I am just helping him to advertise them. Because the price is sooooooo low, I think it isn't a big issue. I could probably take some pic's of them before the deal is finalized.

Price is $600 + shipping from NJ (Posting it here first to give preference to NJ/no-shipping buyers).
Old Dec 6, 2002 | 11:12 AM
  #2  
Aeromaks's Avatar
Registered User
 
Joined: Jun 2002
Posts: 745
From: New Jersey
Most defnitely interested, any pics of the rears? would like to see them, live in jersey, so would pick them up.
Old Dec 6, 2002 | 05:49 PM
  #3  
Injuneer's Avatar
Thread Starter
Administrator
 
Joined: Nov 1998
Posts: 71,119
From: Hell was full so they sent me to NJ
I've had a couple of requests for pic's..... pretty sure they were on his car one of the times it was in GM High-Tech magazine, but don't remember when.

I'll ask him if I could take some pic's in the next couple of days. The rear 17x11's look exactly like any other ZR1 or Grand Sport or AFS replica, just painted white, polished metal edge, with black lug covers and a factory "SS" center cap.
Old Dec 13, 2002 | 11:32 AM
  #4  
Injuneer's Avatar
Thread Starter
Administrator
 
Joined: Nov 1998
Posts: 71,119
From: Hell was full so they sent me to NJ
More info....

Here is a website where you can see pictures of these wheels:

SS WHEEL PICTURES

I checked out the condition..... The wheels are in very good condition. They have no curb rash or metal damage. The white paint is good, and has a very few stone chips on the spoke/rim areas, but more chips and scratches in the center area where the lug nuts go. If you look at the center of each wheel, you will see the 17x7’s have fewer marks on them. On the 17x11’s, I would say that ˝ of what you see is only grease/tar, and the other ˝ are nicks, many of which could be easily polished out. No polishing was done before the pic’s were taken… they were just washed off with water.

Two spare factory 30th SS center caps are included in the price.

It would cost you more than $2,000 to duplicate this setup.
Old Jan 24, 2003 | 12:57 PM
  #5  
Injuneer's Avatar
Thread Starter
Administrator
 
Joined: Nov 1998
Posts: 71,119
From: Hell was full so they sent me to NJ
SOLD

just in case anyone turns up this thread on a "search".

Fred
Old Jan 24, 2003 | 10:30 PM
  #6  
Aeromaks's Avatar
Registered User
 
Joined: Jun 2002
Posts: 745
From: New Jersey
yeah, I have them now, and i thought you had another set for sale, hehe
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
force10
Parts For Sale
2
Aug 10, 2015 08:30 AM
30th Anniv Z28
New Member Introduction
3
Aug 1, 2015 10:39 AM
240ssLs3
Parts For Sale
0
Jul 13, 2015 05:06 PM
Slayer
Parts For Sale
0
Jul 4, 2015 03:06 PM
jasonduaine
Suspension, Chassis, and Brakes
2
Jun 4, 2015 09:29 AM




All times are GMT -5. The time now is 06:06 PM.