if you buy a 94 z28 motor for a 95 3.4 what could you do to switch the motor to a 95. fuel injector wiring?

 

To put an LT1 engine in a car that was orginally a V6, you will need a complete V8 engine, along with the PCM and the wiring harness from the donor car. You will also need a lot of other things....... K-member, front springs, tranny (if you have an M5 in the V6 car), dash cluster, etc.

 

and it is easiest if the donor harness is the same year as the swap car

 

your gonna be hatin life its a beotch to do and get right