Will this thermostat work? MURRAY PLUS+ 4218 (PICS*)
Thread Starter
Registered User
Joined: Jun 2004
Posts: 444
From: Tulsa, OK
Will this thermostat work? MURRAY PLUS+ 4218 (PICS*)
I got this from a friend with an LT1 and he told me it was a 160 thermo that I could use.
Can anyone verify for me? I know these are application specific on LT1s.
Its a Murray Plus+ PN#4218
Here is a shot of the top-bottom-full
http://members.***.net/95lt1/thermo.jpg
Can anyone verify for me? I know these are application specific on LT1s.
Its a Murray Plus+ PN#4218
Here is a shot of the top-bottom-full
http://members.***.net/95lt1/thermo.jpg
Registered User
Joined: Nov 1998
Posts: 2,761
From: Louisville, KY
Re: Will this thermostat work? MURRAY PLUS+ 4218 (PICS*)
Does it look like this:http://shbox.com/1/4th_gen_tech2.html#thermostat_change Click on thermostats for a comparison of the sbc and the LT1 stats.
Registered User
Joined: Dec 1969
Posts: 27,725
From: Little Rock, AR
Re: Will this thermostat work? MURRAY PLUS+ 4218 (PICS*)
If it truly is a 160°, it should have a marking on it somewhere (look inside the bottom middle, if you can't find one). It does look like it might be of the correct physical design for the LT1.
Thread Starter
Registered User
Joined: Jun 2004
Posts: 444
From: Tulsa, OK
Re: Will this thermostat work? MURRAY PLUS+ 4218 (PICS*)
Originally Posted by shoebox
If it truly is a 160°, it should have a marking on it somewhere (look inside the bottom middle, if you can't find one). It does look like it might be of the correct physical design for the LT1.
Thanks Shoebox... and btw.. I did campare it to the pics on your site before I posted this thread. thx again
Thread
Thread Starter
Forum
Replies
Last Post