Ok someone tell me a good place to get the 255 LPH walbro in tank pump? I know they are like around 100-110 shipped or so i just need to know where to get one please.

Also do you guys think that PCMSforless.com would program a ECU for me to make it runable for my s10 project? I would need the VATS turned off and it tuned for a cam. But there are some things i need for my truck need programmed but im not sure. Im calling my harness guy tomorrow and going to ask him. Hopefully it can be done. Also does he sell just ECUS? Like say can i buy a computer from him already tuned or so?

 

go to www.pcmforless.com email him and he will answer all your questions, also madwolf will hook you up with what you need, he is a local board member here.

www.summit.com has the walbro255, also www.jegs.com

 

talk about lazy, do you want us to install the stuff for you too? Do a little research, and ask bri himself if he can program it for you. Little legwork dude, damn!

john

 

well sorry dude! You want research? I have researched this s10 project for a little over a year and have been saving for a little over a year. I had a fuel system and a programmer lined up until just YESTERDAY when someone steered me to this cheaper programming and fuel system. Lazy yea ok! Kiss my *** dude and if you dont have any help for me go shove it up your ***!

O yea and by theway i dont think brian would have wanted a call froms omeone at midnight on a sunday night. I was just thinking maybe someone had some input before ic alled him this morning

 

I got my questions answered by brian just now so i just need to know where to get this Walbro. I looked on Summit and Jegs. Typed in walbro 255, walbro, looked under fuel delivery and found nothing.

 

just to let you know that yes you might wanna do some research before you ask a question thats been beat to death. If you need help, contact me. I have done a LT1 swap on my 94 Blazer and should be able to help you. I have a faithfull group of guys IMing me weekly about this on the S-10 and blazer forums. I have a Walbro pump, PCMforless.com tuning and some other mods like no Vats, no egr, no AIR. give me a holla at blazzerr43 on AIM or blazer43@charter.net

 

You asked 'where is a good place to buy a fuel pump'. You already knew what you wanted, and the price shipped, but dont know where to get it? And i agree about the phone call at midnight, but only brian can tell you what he can do for you. It just irked me to see this remedial question from someone who is expecting to do such a project.

Sorry to see you took it so hard, but my offer of help to you was to do better research. Good luck

john

 

I did research the PCM question and found nothing on both this board and the s10forum.com board as on this board only maybe a few people have done the swap in a S10 and same with the s10 forum board. I was a little crabby this morning i didnt meant to snap. Also i see in the classifieds with people selling them for that price but cant find a place to buy one. I even went to Walbros site with no luck.

 

Alan Kennedy "Injector Dude" on AIM can hook up with the best price on a Walbro 255. I got my high pressure one for 125 with expedited shipping. The standard pressure would be 90 or 100.

 

eric I did the Walbro for a f-body and it went right in , no problem.

 

Hey 94 i have talked to you on Aim my name is Minitruker99....

 

Does summit or Jegs hid their Walbro pumps or am I missing it? I did some searching at both websites and didnt find anything.

 

I forgot that they actually dont sell a Walbro, they sell a Holley and I think a Granetelli built by Walbro. I called around and found that out from Holley so I ordered it. I went threw like 3 stock pumps and had enuff and havent had an issue with it yet