Where to get forged std bore pistons?
Thread Starter
Registered User
Joined: Jan 2002
Posts: 1,743
From: Mission, Kansas
Where to get forged std bore pistons?
Looking for some that aren't low compression, but not having much luck. Does anybody know where to get some that aren't custom? Also needs to be for a 6" rod.
Banned
Joined: May 2003
Posts: 6,661
From: LA (lower Alabama)
Re: Where to get forged std bore pistons?
Originally Posted by 1982z28with18s
Looking for some that aren't low compression, but not having much luck. Does anybody know where to get some that aren't custom? Also needs to be for a 6" rod.
Thread Starter
Registered User
Joined: Jan 2002
Posts: 1,743
From: Mission, Kansas
Re: Where to get forged std bore pistons?
Originally Posted by 1racerdude
Probe Industries
Last edited by 1982z28with18s; Jul 14, 2005 at 02:26 AM.
Banned
Joined: May 2003
Posts: 6,661
From: LA (lower Alabama)
Re: Where to get forged std bore pistons?
Originally Posted by 1982z28with18s
Do they have an off the shelf piston? I've looked at their pistons on several sites, but haven't founded any.
www.probeindustries.com
They have shelf pistons all forged stuff.Also they can make anything ya want.
Registered User
Joined: Dec 2003
Posts: 207
From: Jacksonville, FL
Re: Where to get forged std bore pistons?
www.cnc-motorsports.com
They carry Probe pistons at a cheaper price. Actually, they carry everything at a cheaper price.
They carry Probe pistons at a cheaper price. Actually, they carry everything at a cheaper price.
!["White Knight"'s Avatar](data:image/svg+xml;utf8,<svg xmlns='http://www.w3.org/2000/svg' viewBox='0 0 50 50'><circle class='avatar-circle-default' fill='%2385a3bd' cx='25px' cy='25px' r='20px'></circle><text class='avatar-text-default' x='49%' y='53%' fill='white' text-anchor='middle' alignment-baseline='middle'>"</text></svg>)
Registered User
Joined: Jan 2004
Posts: 121
From: kansas city mo
Re: Where to get forged std bore pistons?
Originally Posted by White Knight
What's wrong with JE SRP pistons? They are aroun the $500 mark. Speed Pro is the cheapest I believe.
Moderator
Joined: Dec 1969
Posts: 10,745
From: Buffalo, New York
Re: Where to get forged std bore pistons?
A piston for a std. bore SBC must be the most common piston in the world. What are you looking for that you can't find? Maybe I am missing something??? Are you sure you need a std. bore though? Most of the time an engine is being rebuilt, the bores at least need to be cleaned up. Have you inspected and measured?
Rich
Rich
Thread Starter
Registered User
Joined: Jan 2002
Posts: 1,743
From: Mission, Kansas
Re: Where to get forged std bore pistons?
Originally Posted by rskrause
A piston for a std. bore SBC must be the most common piston in the world. What are you looking for that you can't find? Maybe I am missing something??? Are you sure you need a std. bore though? Most of the time an engine is being rebuilt, the bores at least need to be cleaned up. Have you inspected and measured?
Rich
Rich
Yes the block has been inspected, I just honed the block since it was extremely good condition and I'm running some srp low compression forged pistons right now, but am considering just doing a piston swap to up the compression for a n/a setup.
I've looked and looked, but I can't find a FORGED piston for standard bore, a 6" rod, and with high compression(wanting 11.0-11.8). I've found non forged pistons, but its not what I want. Also I don't want to take the block back to the machine shop since its in good condition still.
Moderator
Joined: Dec 1969
Posts: 10,745
From: Buffalo, New York
Re: Where to get forged std bore pistons?
I think you are probably just looking at Internet sites. They typically don't list every part. I am not an advertiser here, or I could hook you up. Go directly to the piston manufacturer of choice and tell them what you want. You may pay a bit more than for a stocking piston though.
Rich
Rich
Thread
Thread Starter
Forum
Replies
Last Post
