Hi, im about to procharge my LT1 Fiero,and was wandering what I should do while im at it? Whats a good cam? Lower compression pistons? Any advice? Thanks.

 

Ultimatly I would do the following.

Good set of low compression pistions, good forged rods, and a good crank.

I would get the mains splayed to 4 bolts.

I would talk with a couple of the custom cam guys and get a custom grind cam.

And I would have it all professionally balanced.


-James

 

And by the way. You will need a fuel system to match that blower.

Sweet ride by the way, I love seeing LT1's in other cars.

 

Thanks for the advice, no worries with the fuel delivery, lets just pray the blower fits!!! Thats alot of crap to cram back there.