what size injectors and tb to use?
Thread Starter
Registered User
Joined: Dec 2004
Posts: 43
what size injectors and tb to use?
I am building a 383 with 11 to 1 compression I plan on using a cc306 cam what size tb and injecters do I need?also do I need an adjustible fuel pump regulator?I plan on using a 100 shot or maby a 150 shot nos later.Is this a good cam choice for a 383 with ported heads and 11 to 1?Thanks!
Registered User
Joined: Aug 2003
Posts: 704
From: Imperial, MO.
Re: what size injectors and tb to use?
i will have a 383 stroker set up with a 58mm and 30# injectors
what are the specs on that 306 cam? i see alot of people puting that in their 383 strokers..i talked to lloyd about his LE3 cam, and i think thats what i'm going with.
-Jason
what are the specs on that 306 cam? i see alot of people puting that in their 383 strokers..i talked to lloyd about his LE3 cam, and i think thats what i'm going with.
-Jason
Banned
Joined: May 2003
Posts: 6,661
From: LA (lower Alabama)
Re: what size injectors and tb to use?
If you are serious about HP then 42lb'rs @45PSI and a 1300CFM AS&M mono blade is the ticket. You can make 650-700FWHP with this set up.
Not the best cam but OK depending on your head numbers.
Not the best cam but OK depending on your head numbers.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
