seawolf06

Look at the Voodoo cams from Lunati. They will be a little rougher than most with an auto trans, but right at home with an M6.

slomarao

Llyod's site is down. He is still in business.
I would go for le2's and a matching cam

Caveman1990

I drive an Auto. What Size of injectors should I run and What Gaskets fit the LE2's?

osolow

I ran fel-pro 1074 head gaskets and stock intake gaskets(Thats what Lloyd told me to run).
32lb injectors are about right if you don't plan on spraying. You will have to get it tuned.

96capricemgr

On second thought go with the AFRs.

seawolf06

30lb injectors are good, but you can go with 42lb if you feel the need. Just make sure it is tuned for them before you start it up.

Any LT1 head gasket will fit. The one you choose will depend on deck height, pistons and combustion chamber size.

MEAN LT1

Wow, I forgot the TFS heads were 64cc heads.

seawolf06

So are the AFR heads, IIRC. That's why I am so excited about the Dart heads. 58cc as cast!

Caveman1990

Whats the highest RPM I could run my engine to while still being safe and making the most power?

ShownomercyZ28

6200?

seawolf06

No two blocks are the same. There are too many variables that come into play.