im not too savvy about what ive done to my camaro, because i really wasnt the one doing the mechanics of it, but i recently did an lt1/t56 swap to my 3.4/a4 camaro, and i did a few things that im not exactly sure of..and it would be great if you guys led me the right way...

 

sorry.

i dropped in an lt1/t56 off a 96 trans am. the car is a 95 camaro. and he swapped out the harnesses to a 94 for 0bd1 purposes....

my question is, i have pacesetter longtubes with just 2 o2 sensors. do they make sims for it? im having a bad problem with my car, and ive disconnected the o2, and it turns out that the car runs "decent" on limp mode.

the car is obd1, do you guys know where i can get it scanned? i have my v6 speedometer and im not sure if the ses light is working right.

thanks guys.

 

can i atleast get an answer at to where would be the best bet to connect an obd1 reader at.

autozone and discount only have obd2 around here.

thanks again guys

 

AutoXray scanner with the OBD2 cable should work if you have the OBD2 connector and an OBD1 system, like '95 LT1s. Murrays has em, and I think Pep Boys too.