Waterpump & Opti replacement
06-22-2006, 09:02 PM
#1
Registered User
Thread Starter
Join Date: Sep 2003
Location: Jacksonville, Fl
Posts: 24
Waterpump & Opti replacement
Hey everyone,
I just did the w/p and opti replacement. It wasn't too bad, took about 8 hrs. This link was very helpful--http://www.houston-f-body.org/tech/optispark/. One thing I want to add, if you are replacing the w/p, make sure the coupling that mates the spline shaft on the engine and w/p gets put on the new w/p. I didn't realize mine was still on the old w/p until I couldn't figure out why the engine kept overheating, even after bleeding the system. Needless to say I had to tear everything back down again. Didn't need that aggravation. Jason Cromer hooked me up with the w/p, $175 and opti, $238.
--------------------------------------------
'95 Z28, M6, black, stock, T-Top, graphite cloth, 116,000 miles
Ordered July '94, built Dec. '94, purchased Jan. '95
Enjoy it as much today as the day I bought it
I just did the w/p and opti replacement. It wasn't too bad, took about 8 hrs. This link was very helpful--http://www.houston-f-body.org/tech/optispark/. One thing I want to add, if you are replacing the w/p, make sure the coupling that mates the spline shaft on the engine and w/p gets put on the new w/p. I didn't realize mine was still on the old w/p until I couldn't figure out why the engine kept overheating, even after bleeding the system. Needless to say I had to tear everything back down again. Didn't need that aggravation. Jason Cromer hooked me up with the w/p, $175 and opti, $238.
--------------------------------------------
'95 Z28, M6, black, stock, T-Top, graphite cloth, 116,000 miles
Ordered July '94, built Dec. '94, purchased Jan. '95
Enjoy it as much today as the day I bought it
10-09-2006, 10:08 PM
#2
Registered User
Join Date: Feb 2002
Location: Talbott, TN
Posts: 519
Re: Waterpump & Opti replacement
Originally Posted by 95dzz28
Hey everyone,
I just did the w/p and opti replacement. It wasn't too bad, took about 8 hrs. This link was very helpful--http://www.houston-f-body.org/tech/optispark/. One thing I want to add, if you are replacing the w/p, make sure the coupling that mates the spline shaft on the engine and w/p gets put on the new w/p. I didn't realize mine was still on the old w/p until I couldn't figure out why the engine kept overheating, even after bleeding the system. Needless to say I had to tear everything back down again. Didn't need that aggravation. Jason Cromer hooked me up with the w/p, $175 and opti, $238.
--------------------------------------------
'95 Z28, M6, black, stock, T-Top, graphite cloth, 116,000 miles
Ordered July '94, built Dec. '94, purchased Jan. '95
Enjoy it as much today as the day I bought it
I just did the w/p and opti replacement. It wasn't too bad, took about 8 hrs. This link was very helpful--http://www.houston-f-body.org/tech/optispark/. One thing I want to add, if you are replacing the w/p, make sure the coupling that mates the spline shaft on the engine and w/p gets put on the new w/p. I didn't realize mine was still on the old w/p until I couldn't figure out why the engine kept overheating, even after bleeding the system. Needless to say I had to tear everything back down again. Didn't need that aggravation. Jason Cromer hooked me up with the w/p, $175 and opti, $238.
--------------------------------------------
'95 Z28, M6, black, stock, T-Top, graphite cloth, 116,000 miles
Ordered July '94, built Dec. '94, purchased Jan. '95
Enjoy it as much today as the day I bought it
Thread
Thread Starter
Forum
Replies
Last Post
Sergio
LT1 Based Engine Tech
11
01-27-2016 04:27 PM
Dan_the_ManZ28
LT1 Based Engine Tech
7
02-21-2015 02:01 PM