I wanted to know what your thoughts about the cam, performance. Basically is it what you were expecting etc..

I have the top end of my engine off and I'm seriously thinking about stepping up on the cam choice. This is the Cam Motions recomended hydraulic roller:

RECOMMENDATION
Grind Number X2341-2391-12+4
Duration (intake/exaust) 234/241
Lift (intake/exaust) 576 (1.6)/558 (1.5)
Lobe Center Separation 112
Intake Centerline 108
Power range - 3000-6400

A few other things I'll be upgrading along the way:

Meziere WP
30lb injectors
New fuel pump
Maybe a 52-58mm TB?
Tuning of course


Anyway, just wanted some opinions from people who have ran one before etc. I need to know what the cam specs were and hp or traps speeds would be beneficial along with your overall setup etc.

Any help would be great, thanks.

Mike

 

these guys have been put out cams making some nasty numbers especially on the fords. My mustang's 408 has a cam motion cam going in it.

 

Ya, I've heard good things about their solid rollers. I just don't recall hearing about any of their hydraulic rollers on LT1's??

Anyone?

Mike

 

No one is running a Cam Motion hydraulic roller eh? Interesting.

Mike

 

I'm happy with mine.