Thanks to all here that supplied help to me with head install..
#1
Registered User
Thread Starter
Join Date: Jun 2001
Location: "Shoulda Gotton An LS1 Racin"
Posts: 872
Thanks to all here that supplied help to me with head install..
Well I was very lucky last year when I installed my Hot Cam to have the knowledge of many of you's at my fingertips. Well now I just completed my GTP Stage 2 head install & would once again like to thank everyone that blessed me with insight & awnsers to my many questions. If it wasn't for you guys I would have never known that the 875-16 Comp lifters were to be set at 0 lash. I had set them at 3/4 turns past 0 but some of you guys let me know that the new lifters needed to be set at 0. Car runs great on old tune. It seems to have quite a bit more torque. It pulls hard. Can't wait to see how it performs at the track. The more I drove it tonight it seemed to get stronger!!! I should be able to hit the 11's now but I won't hold my breath.
Thanks again to you guys. It is more appreciated by me then you will ever realize!!!
Thanks again to you guys. It is more appreciated by me then you will ever realize!!!
#2
Re: Thanks to all here that supplied help to me with head install..
Originally posted by Smokn '94 Z
If it wasn't for you guys I would have never known that the 875-16 Comp lifters were to be set at 0 lash
If it wasn't for you guys I would have never known that the 875-16 Comp lifters were to be set at 0 lash
#4
Registered User
Thread Starter
Join Date: Jun 2001
Location: "Shoulda Gotton An LS1 Racin"
Posts: 872
Originally posted by White_94_TA
Smokin,
How much did you pay for your stage 2's? Ever have them flowed? I'm curious about the numbers from the Stage 2's.
Smokin,
How much did you pay for your stage 2's? Ever have them flowed? I'm curious about the numbers from the Stage 2's.
Thread
Thread Starter
Forum
Replies
Last Post
ChrisFrez
CamaroZ28.Com Podcast
0
03-01-2015 01:33 PM
NewsBot
2010 - 2015 Camaro News, Sightings, Pictures, and Multimedia
0
12-28-2014 06:20 PM