is there a way i could test the eec purge sol. to see if thats why im getting my p1441 code? or is it just a replace it and see thing??

the reason im asking is cuz im getting a hesitation from stop to go...only when the car is warm at reg temp......when cold it has more *****...

 

On the EEC purge solenoid, pull off the vacuum line that goes from the purge solenoid to the throttle body. First make sure that there are no leaks in the vacuum line. Then plug the vacuum line up. Clear your code. Then take it for a drive. See if the hestitation disappears.

If the SES light comes on, check the code again. It will probably be the one for "no flow during purge" rather than the one for "flow during non-purge".

That will tell you if your P1441 has anything to do with the hesitation.

 

sweet! thanx man...your my hero now....if i could only get outta work early to see that would be better thanx though!