OK SO Im doing a V6 swap out with the 3.slow & inwith the new LTfast with a T56 trans. I have the engne Trans, wiring , new drive shaft , pretty much everyting , Now my questons.

Will the 3.4 with a 5 speed trans stock torsion bar interchange with the T56??

Will the hydrolics from the 5 speed work with the T56 ??

Also the wiring harness I have for the Lt1 was from an Automatic work with my T56 trans???

will the V6 radiator work with the Lt1???

Any help is appreciated here , Also if there is anything else you can think of I may need for this converson let me know.

Thank you guys.

JOSH

 

The wiring harness and the radiator should work. You'll need to do a little cutting and splicing to make some of the tranny connections work. You'll probably want to get a dual fan setup, the LT1 makes a tad more heat than a 3.4.

I doubt any of the other stuff will work.

 

thanks I appreciate it