"tape" thread sealant or "liquid" thread sealant??
Thread Starter
Registered User
Joined: Feb 2002
Posts: 479
"tape" thread sealant or "liquid" thread sealant??
hi guys
im just wondering, as the subject states, which is better? mainly wanna know which one is better for the "long" water pump bolts. i used the liquid type sealnt on those threads but it seemed it all squeezed out when i put in the bolts. i used the tape type sealant on the coolant sensor threads and it seems much better. just wanna be 100% sure no coolant gets into places it shouldnt go. thank you very much
im just wondering, as the subject states, which is better? mainly wanna know which one is better for the "long" water pump bolts. i used the liquid type sealnt on those threads but it seemed it all squeezed out when i put in the bolts. i used the tape type sealant on the coolant sensor threads and it seems much better. just wanna be 100% sure no coolant gets into places it shouldnt go. thank you very much
Registered User
Joined: Jun 1999
Posts: 939
From: Lowcountry
Boy you really are getting paranoid now that it's up and running 
You should be fine. The paste gives more accurate torque readings but the tape will work. This is less of an issue with waterpump bolts then, say, cylinder head bolts.
You should be fine. The paste gives more accurate torque readings but the tape will work. This is less of an issue with waterpump bolts then, say, cylinder head bolts.
big time paranoid
Thread
Thread Starter
Forum
Replies
Last Post
