How bad is my car going to run when i put in my new cam?

will i notice a big difference or a little difference?

the pcm wont be programed in 2 weeks.

This week mods:
1. custom grind cam bigger than hot cam...smaller than cc306
2. 1.6 rr's
3. comp r lifters
4. Plugs and wires.

Current mods:
1. slp cai
2. cut out
3. Riggs Racing stage 2 heads
4. 160 thermo
5. skinnys and bfg dr's

 

might idle funny but you should be fine till you get it tuned

 

ttt

 

You *should* be OK with the 800 RPM 6 speed idle. It will throw a Service engine light and the idle might not be very stable, but it will be driveable.

 

I'm thinking you'll be ok till you get it tuned it wont like idleing thought...at least thats my guess.

 

what about performance....will i notice a difference or not till i get it tuned?

 

You most likely will, but more after tuning obviously.

 

you do tuning....right?

obd-II

 

Just did hot cam kit, LT's, 3" exhaust, home port heads and 4.10's

Using the stock program and Hypertech (NO TUNNING) for the rev limiter (6300),fan turn on and 4.10 correction.

When't 12.90 at 112mph.

Hey MADWOLF what is the HP gain for your tune?

RYAN