Hey guys, I'm doing the a4 to m6 swap and am taking out the steering coloumn to get at the pedal assyembly and what not. I have taken off the two nuts that hold it to the top of the dash, and there are three bolts holding it to the firewall kind off. My question is, is that all the bolts I have to remove or is there something else I have to remove to get the colomn out? If so what, and how do I do it. Thanks, any help would be great!!!!!

There is a bolt on the steering shaft on the other side of the firewall that you have to remove. Columm removal is covered in my ignition switch R&R on my Tech Page.