Its very mild, selected to allow the engine to pass NJ rolling emissions, while also allowing it to spin to 7,000+rpm on the 300-shot of nitrous.

230/242 0.590/0.590 114 LSA

It was ground by Comp Cams.

 

I use Isky Red Zones with the use of a mild solid roller. Car is street driven about once a week. All seems well.
Only item to note on the Iskys is you'll lose oil pressure because of the extra oiling ports for the roller bearings and cam lobes for low rpm use. I put in a set of oil restricting pushrods to ease my mind and all is well thus far. I have about 2K miles on the engine.

 

anyone have some part numbers?