Do any of you run solid motor and tranny mounts or do you run polyurethane mounts? List what you run and if you like your combo or can you suggest a combo. My car is a 97z28 with Bmr control arms and pan-hard bar with polyurethane bushings.

 

I use Energy Susp poly in the tranny and motor mounts. I did the tranny first and noticed a little more vibe. Then I did the motor. While doing the motor I noticed the passenger side mount was collasped about an inch. I did not notice anything after installing them. I hear solid mounts are too harsh for a daily driver with big cam.

 

do NOT go solid

 

I run poly tranny mount and poly motor mounts. Not too much vibe from my setup (heads/cam/long tubes/etc).