ses
Thread Starter
Registered User
Joined: Mar 2003
Posts: 447
From: reno, nv
ses
my ses light comes on about 20 seconds after i start my car. i scanned my computer and it through out a code 27 egr vacume control solonoid, so i replaced it and the light still comes on. i havent had the chance to scan it again. please help
Registered User
Joined: Aug 2003
Posts: 450
From: Maryland
Pull the PCM fuses in the drivers compartment right above where your left knee is, there is a panel there. There are 2 PCM fuses. The PCM ignition and one other, PCM Battery. Pull them both, come back in 10 minutes or so and put em back. Car might sputter a little when you start it back up b/c it takes a minute for the PCM to read the sensors. Make sure the car is off when you do this.
Last edited by ead94z28; Oct 28, 2003 at 10:16 PM.
Thread
Thread Starter
Forum
Replies
Last Post
CARiD
2010 - 2015 Camaro Interior, Exterior, Paint & Body, Electronics/Car Audio
0
Jul 7, 2015 08:19 AM