LT1 Based Engine Tech 1993-1997 LT1/LT4 Engine Related

Removing The Inktake - What to Do ?

Thread Tools
 
Search this Thread
 
Old Jun 14, 2003 | 08:20 PM
  #1  
AENIMA95z28's Avatar
Thread Starter
Registered User
 
Joined: Dec 2002
Posts: 290
From: Oviedo
Removing The Inktake - What to Do ?

About how hard is it to remove the intake? what preperations should be taken? Anything i should know before i pull it ?
Old Jun 14, 2003 | 08:36 PM
  #2  
treyZ28's Avatar
Banned
 
Joined: Aug 2001
Posts: 3,505
From: looking for a flow bench so Brook and I can race
comes off a lot easier with the fuel lines disconnected and valve covers removed.

it will be "stuck" when you get all the bolts off. tap around with a skrew driver and a hammer.
Old Jun 14, 2003 | 08:40 PM
  #3  
PatriotTA's Avatar
Registered User
 
Joined: Feb 2003
Posts: 1,017
From: Toledo, OH
http://www.geocities.com/MotorCity/Downs/4013/ol.html

http://www.projecttransam.com/projects2.asp

There's two very good write-ups.
Old Jun 14, 2003 | 08:41 PM
  #4  
funina91ss's Avatar
Registered User
 
Joined: Apr 2001
Posts: 1,331
From: Huntington,WV
If you have an aircompressor blow off the intake first and take off the inj. wires etc. etc.
Old Jun 14, 2003 | 08:45 PM
  #5  
AENIMA95z28's Avatar
Thread Starter
Registered User
 
Joined: Dec 2002
Posts: 290
From: Oviedo
ok thanks guys, would you all say this is a pretty difficult procedure ?
Old Jun 14, 2003 | 08:47 PM
  #6  
funina91ss's Avatar
Registered User
 
Joined: Apr 2001
Posts: 1,331
From: Huntington,WV
scale of 1-10 I would say 3.5
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
greenzee28
LT1 Based Engine Tech
6
Sep 25, 2015 04:29 PM
Jake Bialke
General 1967-2002 F-Body Tech
0
Sep 24, 2015 11:31 AM
wbspoon
Parts For Sale
0
Sep 19, 2015 08:12 AM
NewsBot
2010 - 2015 Camaro News, Sightings, Pictures, and Multimedia
0
Sep 14, 2015 09:20 AM
RX Speed Works
Supporting Vendor Group Purchases and Sales
0
Sep 11, 2015 03:31 PM




All times are GMT -5. The time now is 03:12 PM.