i ordered a LT4 hotcam on ebay for pretty cheap, all the part numbers and everything on the card and the box match up, but the card says the intake/exhaust duration @ .050 is 219/228 but everywhere else i see that sells the hotcam lists it as 218/228, is this right?

 

I remember I found the same when I installed the hotcam in my previous motor.
You should be allright.
By the way, a 2400 stall works great with the hotcam.
RG

 

just trying to be certain...this is the card and GM paper i recieved with the cam

 

The parts numbers are correct, I wouldn't worry about it.

 

Be sure to install some fresh LT4 valve springs along with the hot-cam (didn't see those in the photos). Also, I see you have the 1.6 RRs which is also a great up-grade. I really liked my hot-cam when I was doing bolt-ons and I'm sure you will like it. I went from 13.40s to 12.60s with the hot-cam.

WD

 

alright cool, can't wait to get it in!

 

You lucky dog. You got the super hot cam.

 

yea they're in the other box, thanks! those are some really good numbers you had too. i ran a 13.5 with my current mods and only made 1 pass before the track closed, so i could have possibly gotten a 13.4 but who knows. i was hoping for at least a 12.9 after the cam but maybe now i can wish for a mid 12 as well

 

With a quality stall in the 3200 range, along with a set of 3.73 gears, and a set of stickie tires, no problem.

 

My hotcam also said 219/228 on the card, I had to look at it a couple of times to make sure I wasn't seeing things.

 

yea i've been all worked up on wondering if this is the right thing i ordered too


so...do you guys think its the same one as everyone else has, just printed differently? or maybe its actually is 1º more than normal?

 

Iv'e heard of it before. No biggie.