Pushrod recommendation
Thread Starter
Registered User
Joined: Jan 2006
Posts: 646
From: Long Island N.Y. Via Powhatan VA
Pushrod recommendation
What is a good pushrod to run on S/A Crane race gold 1.6, in 5/16 diameter, that do not require guide plates? I didn't think any pushrod "needed" guide plates, but apparently I'm mistaken. Thanks in advance!
Registered User
Joined: Dec 2005
Posts: 426
From: Dayton, Ohio
Re: Pushrod recommendation
S/A rocker arms do not require the use of guide plates so the stock pushrod is ok. The NSA rocker requires guide plates and hardened pushrods.
Thread Starter
Registered User
Joined: Jan 2006
Posts: 646
From: Long Island N.Y. Via Powhatan VA
Xjs, thanks, I was just wanting to upgrade to a hardened pushrod, and what I've looked at states:
Use with guideplates: yes
It just been confusing me, not sure I they mean "guideplate use required", or "okay to use with guideplates". Hope that made sense. lol.
Use with guideplates: yes
It just been confusing me, not sure I they mean "guideplate use required", or "okay to use with guideplates". Hope that made sense. lol.
Registered User
Joined: Dec 2005
Posts: 426
From: Dayton, Ohio
Re: Pushrod recommendation
I run the Trickflow 5/16 x 7.200" chromoly ones myself.
Thread
Thread Starter
Forum
Replies
Last Post
tommalcolm
Computer Diagnostics and Tuning
2
Sep 11, 2015 03:39 PM
