Power Problem
Guys need your imput or help. Put a LPE 74211 cam in my car, had it tuned, and only put down 305hp 310tq to the rear wheels. Car has no torque till 4k rpm and peaks hp at 5700. LPE said that the cam might be advanced and to check it again and that it should put down a lot more low end torque than i'm making. Put the LT1 extreme duty chain on with cam . The car revs extremly smooth and feels very strong but track #'s showed otherwise. quikest e.t before cam cam was 13.14 @ 103. With cam quikest e.t so far is 13.14 @ 103mph. Car runs consistant mph but not time. Would eppreciate any help or assistance to get right. I chose this cam cause I'm in Cali and still need to pass smog. Air/Fuel was 12.7to 13.0 across the board with no drop in timing and zero detonation. Force Fed picked up 30 hp on tune alone.
Car 1996 SS # 667 A4
Mods[/U]
3:42 gears, bbk 1 5/8 shorties, 2800 vig, u/d pullies, msd 6al, 2otl, Slp dual tube cai, crane 1.6 rr's, LPE cam 74211 (211/219 533/560), custom tuned
Car 1996 SS # 667 A4
Mods[/U]
3:42 gears, bbk 1 5/8 shorties, 2800 vig, u/d pullies, msd 6al, 2otl, Slp dual tube cai, crane 1.6 rr's, LPE cam 74211 (211/219 533/560), custom tuned
Last edited by ws96ss; Oct 25, 2003 at 05:02 AM.
Thread
Thread Starter
Forum
Replies
Last Post
guruerror
General 1967-2002 F-Body Tech
8
Dec 12, 2020 06:32 PM
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
slothgrant
Car Audio and Electronics
0
Aug 22, 2002 03:01 PM



