port specs for the hotcam?
01-26-2003, 05:01 PM
#1
Registered User
Thread Starter
Join Date: Apr 2002
Location: baton rouge, La
Posts: 126
port specs for the hotcam?
well ive got the motor tore down and im thinking about sending the heads and intake off to get port matched to my new hotcam kit.anyone have any good port specs for the hotcam?also what is a roundabout price a machine shop will charge and turaround time for them?as allways thanks for the help
01-26-2003, 05:54 PM
#2
Registered User
Join Date: Oct 2000
Location: Charlotte, NC
Posts: 786
Ditch the hotcam kit components at the very least and have the shop put quality components in the heads since theyre off and can be machined.
It'll make power either way if the headwork is good, but you're going about this backwards, choose your cam last IMO.
It'll make power either way if the headwork is good, but you're going about this backwards, choose your cam last IMO.
01-26-2003, 08:13 PM
#3
Registered User
Join Date: Jun 2002
Location: TN
Posts: 243
Originally posted by SkarodoM
Ditch the hotcam kit components at the very least and have the shop put quality components in the heads since theyre off and can be machined.
It'll make power either way if the headwork is good, but you're going about this backwards, choose your cam last IMO.
Ditch the hotcam kit components at the very least and have the shop put quality components in the heads since theyre off and can be machined.
It'll make power either way if the headwork is good, but you're going about this backwards, choose your cam last IMO.
01-26-2003, 09:16 PM
#4
Registered User
Thread Starter
Join Date: Apr 2002
Location: baton rouge, La
Posts: 126
Originally posted by SkarodoM
Ditch the hotcam kit components at the very least and have the shop put quality components in the heads since theyre off and can be machined.
It'll make power either way if the headwork is good, but you're going about this backwards, choose your cam last IMO.
Ditch the hotcam kit components at the very least and have the shop put quality components in the heads since theyre off and can be machined.
It'll make power either way if the headwork is good, but you're going about this backwards, choose your cam last IMO.
i allready have the hotcam kit,so i might do the heads and intake.i want to be prepared when i go to the machine shop.anyone know what are the best port numbers?
01-26-2003, 09:49 PM
#5
Registered User
Join Date: Jun 2001
Location: "Shoulda Gotton An LS1 Racin"
Posts: 872
Originally posted by weaponZ
i allready have the hotcam kit,so i might do the heads and intake.i want to be prepared when i go to the machine shop.anyone know what are the best port numbers?
i allready have the hotcam kit,so i might do the heads and intake.i want to be prepared when i go to the machine shop.anyone know what are the best port numbers?
Do a search for the #'s of the GTP's. I don't have them off the top of my head...
Thread
Thread Starter
Forum
Replies
Last Post
sleeperZ96BT
Parts For Sale
5
09-09-2015 08:28 AM