The post I had found by searching, the link for the picture was dead (fbody.com link by Fred). So I am curious to see how you guys who have done the vented opti conversion T'd off your EGR Vacuum line to accommodate for the vented opti vacuum harness. I have seen shoebox's site on how GM did it from the factory on the 95 cars, but would like to see how the folks here who did the conversion on their own 93-94 cars have done it.

Thanks
Neil

 

It's as simple as putting a tee in the vacuum line to the EGR valve. One way is shown here.

 

 

Perfect, thanks guys.