People with GM847 inside!
Thread Starter
Registered User
Joined: Sep 2002
Posts: 1,942
From: kitchener/Ontario
People with GM847 inside!
Just trying to find real people that have used this cam to get all the pro's and con's
Pistion to valve
cam kit
part #
where did it peak on the dyno
what kind of power numbers are you making on the dyno?
thx
Pistion to valve
cam kit
part #
where did it peak on the dyno
what kind of power numbers are you making on the dyno?
thx
Registered User
Joined: Aug 2001
Posts: 870
From: Cuyahoga Falls, OHIO
Do a search for a board member called OneFlyn95z28. He's uses this cam and has run the car on a dyno.
It is also the cam I'm going with in about 2 months once I get my heads back from the machine shop. I'll be using it with the stock bottom end but I'm not sure where the heads will flow at. I hope to make 380+ rwhp but with well ported heads it shoiuld make over 400 rwhp. It falls into the same group as the XE 236/242 and GTP-6 cam.
It is also the cam I'm going with in about 2 months once I get my heads back from the machine shop. I'll be using it with the stock bottom end but I'm not sure where the heads will flow at. I hope to make 380+ rwhp but with well ported heads it shoiuld make over 400 rwhp. It falls into the same group as the XE 236/242 and GTP-6 cam.
Thread
Thread Starter
Forum
Replies
Last Post
RX Speed Works
Supporting Vendor Group Purchases and Sales
3
Oct 1, 2015 10:19 PM
autoxr166
General 1967-2002 F-Body Tech
0
Sep 25, 2015 04:21 PM