Ok guys well i decided to go all out on my motor swap. Well not all out but i couldnt leave my bottom end not touched. So here it is. I already got the 233/239 cam, comp r lifters, hardened pushrods but i decided to bore it .30 oer to a 355 with SRP forged pistons and new bearings along with Eagle H beam forged rods. What do you guys think? Sound pretty satrong to you?

 

If you are not going to use a power adder you don't need the expense of new rods.Get bolts put in the stock ones,have them resized and rock on.