LT1 Based Engine Tech 1993-1997 LT1/LT4 Engine Related

ok what is the best way for performance from ur LT1?

Old Jan 30, 2003 | 10:20 AM
  #1  
DFISH's Avatar
Thread Starter
Registered User
 
Joined: Jan 2003
Posts: 3
Question ok what is the best way for performance from ur LT1?

what is the best to leave ur z28 naturally aspirated or supercharge it??? i mean it's prolly good both ways depending upon how u like it but if ur supercharge it what is the best brand and what is some of the most boost u can run to a big v-8 like that??? i mean 6-10 psi? do most superchargers add about 25 - 35% hp??? well help would be nice that

~David~
Old Jan 30, 2003 | 10:34 AM
  #2  
oldBones's Avatar
Registered User
 
Joined: Jan 2003
Posts: 109
From: Lawson, Missouri
Most people like to go the 383 route but I've seen Lt1 put down 400hp to the ground with 6lb of boost and tuning. Personally I'm going for non-aspirated. (Try the search option it's easy to find good info with it.)
Old Jan 30, 2003 | 10:36 AM
  #3  
'94 Bad A Z28's Avatar
Registered User
 
Joined: Jan 2001
Posts: 2,905
From: Orlando,Fl
Re: ok what is the best way for performance from ur LT1?

Originally posted by DFISH
what is the best to leave ur z28 naturally aspirated or supercharge it??? i mean it's prolly good both ways depending upon how u like it but if ur supercharge it what is the best brand and what is some of the most boost u can run to a big v-8 like that??? i mean 6-10 psi? do most superchargers add about 25 - 35% hp??? well help would be nice that

~David~
I don't think there is a "best way." It's more of a preference thing.
Old Jan 30, 2003 | 11:31 AM
  #4  
trax's Avatar
Registered User
 
Joined: May 2002
Posts: 611
From: Chicago 'burbs
This is one tough question to answer. There are a LOT of variables. Take 1 from each set:

Bottom end
Stock
Stock displacement, forged
383
396

Power adder
NA (Naturally Aspirated, ie. no power adder)
Supercharger (Vortech, ATI, etc... and then pick trim levels and boost)
custom Turbo setup
Nitrous (then choose wet or dry)


This is only the tip of the iceberg. The main limiting factors are (1) how much $ you have (in this case, NA is the cheapest) and (2) how much time and effort you want to put in.

Another quick tidbit...

You can hit 400 at the wheels, NA, with a stock bottom end. Just use a CC 306 or XE 230/236. The XE 224/230, which I'm going with, comes close in HP but gets waaaay more torque.

Good luck! Feel free to ask questions!

--Trax
Old Jan 30, 2003 | 12:02 PM
  #5  
'94 Bad A Z28's Avatar
Registered User
 
Joined: Jan 2001
Posts: 2,905
From: Orlando,Fl
Originally posted by trax
(in this case, NA is the cheapest) and (2) how much time and effort you want to put in.

--Trax
No, nitrous is the cheapest way to make a car "fast." That is untill you have to build the motor to handle it because you were dumb and didn't upgrade anything along with the install of the nitrous... I.E. the fuel system, a big limiting factor for nitrous.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
F'n1996Z28SS
Cars For Sale
8
Aug 23, 2023 11:19 PM
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
oldschool
Parts For Sale
16
Feb 9, 2016 09:21 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 01:27 PM.