LT1 Based Engine Tech 1993-1997 LT1/LT4 Engine Related

Oh #*%^!!

Thread Tools
 
Search this Thread
 
Old Feb 11, 2003 | 07:28 PM
  #1  
JoFerZ's Avatar
Thread Starter
Registered User
 
Joined: Jan 2002
Posts: 55
From: Fayetteville, Arkansas
Oh #*%^!!

A bunch of crud (old oil and gritty stuff) fell down into my chamber through the spark plug hole. I took the plug out and didn't notice all the dirt around the plug. Well, it all fell in. It ended up taking almost all day, b/c i live on campus and didn't have access to a vacuum, but I finally got ahold of one and fabbed up a small tube for it and was able to suck it all out. I'm pretty sure I got it all out, but how bad would it have been if I would have left it? It had the texture of sand, and luckily it was relatively easy to suck up. Those nissan plugs are vertical and are pretty deep, so a lot of stuff gets caught down in beside it. Thanks for the info.
Old Feb 11, 2003 | 08:40 PM
  #2  
FastZinTennessee's Avatar
Registered User
 
Joined: Mar 2001
Posts: 2,521
From: Costa Mesa, CA
I'm sure this happens often with some people. I wouldn't worry about it too much, unless you wanna take the top half of the motor off




All times are GMT -5. The time now is 08:24 PM.