seems to be spring loaded. I released blue cable and it moves freely. I reconnected the blue cable and physically pushed pully down and the black part next to that pully moved forward and freed the gas peddle to rev freely. When put back into gear, that black tab moves back along with the gears of that turning. the black tab does not move back forward and revs are lost once again. Seems that the motor is locked up and needs to be replaced, any objections?

 

I'd have to take a look at my old servo, but it sounds like you found your problem. You can either replace it, or get rid of it and swap in some non-TCS throttle and cruise cables. I have my old servo from my 96 Camaro if you want it.

 

I pm'd you and thanks again everyone

 

Spartan7 won't reply to me, does anyone else by chance have an extra servo?