Just finished replacing my heads, and fired it up. Runs great, but I noticed on only 2 rockers on the drivers side little to no oil is coming through the push rods on just 2 rockers? I do have great oil pressure everything else is getting oil I'm thinking something may be wrong? Is it typical to not visually see oil on idle

http://www.youtube.com/watch?v=tarv1FWhZ8I

 

Sounds like valves may be adjusted wrong, if not bad lifters.

 

I think I am going to go through and re-do the preload on these lifters again and see if that helps.

 

were they brand new lifters?

 

No, they probably have 10k on them.