Next step of mods, need help
Next step of mods, need help
just got the car paid off, plus got some extra cash. My mods are mac headers + y-pipe, cut-out, functional ram air, hurst short throw shifter, mac lowering springs, and bmr lca's w/ relocation bracets.
I have traction problems (avg 60 foot time = 2.3) on street tires no dr's yet. Best 1/4 is 13.8 at 106. last dyno was 288hp and 332tq.
What should i get to make me faster and hook better without losing my low end torque.
My car will not be a daily driver but i still want it to be very streetable. Looking to spend 2-3k. What do you guys suggest.
Thanks
Kevin
I have traction problems (avg 60 foot time = 2.3) on street tires no dr's yet. Best 1/4 is 13.8 at 106. last dyno was 288hp and 332tq.
What should i get to make me faster and hook better without losing my low end torque.
My car will not be a daily driver but i still want it to be very streetable. Looking to spend 2-3k. What do you guys suggest.
Thanks
Kevin
If you have about 3k to spend, then I would say get a nice heads/cam package+dyno tuning. I don't know if you will have any money left for suspension after that though ( I am assuming you are not going to install the heads/cam by yourself). Good luck.
nitrous and a 12 bolt with ET streets, easily attainable for $3k, and you will have money left over for some SFC's and maybe (maybe) a torque arm
that will leave the car plenty streetable and plenty fast
that will leave the car plenty streetable and plenty fast
Thread
Thread Starter
Forum
Replies
Last Post
Formula Steve
LT1 Based Engine Tech
45
Sep 19, 2023 08:31 AM
WobblySausage
LT1 Based Engine Tech
6
Oct 7, 2015 02:44 PM



