new RR studs?
Thread Starter
Registered User
Joined: Oct 2004
Posts: 9
From: Saratoga NY
new RR studs?
I have searched and still cant find the answers..
i bought crane 1.6 gold RR(3/8th stud) CM hardened pushrods and springs off a guy who has an impala.. N/E way do i need new studs or will the stock studs be safe? I am not planning on doing a cam anytime soon. Alot of impala guys use stock press in studs and 1.6s and dont have problems should i bother?
i bought crane 1.6 gold RR(3/8th stud) CM hardened pushrods and springs off a guy who has an impala.. N/E way do i need new studs or will the stock studs be safe? I am not planning on doing a cam anytime soon. Alot of impala guys use stock press in studs and 1.6s and dont have problems should i bother?
Registered User
Joined: Dec 1969
Posts: 27,727
From: Little Rock, AR
Re: new RR studs?
If you have an f-body LT1, you have 3/8 screw in studs as stock. No need to do anything to install those rockers you bought.
Last edited by shoebox; Feb 11, 2005 at 01:09 PM.
Thread
Thread Starter
Forum
Replies
Last Post