Hey guys, i have a 95 TA and my driver side window refuses to roll up or down more than 3 inches before dying on me. This is extremely irritating and I'm assuming the motor is going. How hard is it to change out the power window motors on these cars? any advice would be appreciated. thanks!

 

Here's a "How To" link:

http://csce.uark.edu/~jgbertr/rb/alt...ndowmotor.html

 

Yep that's the guide I used!!! I've got a Formula, but same thing. Here's the pics from when I did it:

http://paradox.shacknet.nu/dave88lx/formula/window2.jpg

http://paradox.shacknet.nu/dave88lx/formula/window3.jpg

http://paradox.shacknet.nu/dave88lx/formula/window1.jpg

http://paradox.shacknet.nu/dave88lx/...ndowmotors.jpg

 

Thanks guys, that helps a LOT!

 

Replaced one on a 94 camaro with a friend.. VERY annoying!!!! not too hard though, just time consuming!