LT1 Based Engine Tech 1993-1997 LT1/LT4 Engine Related

Need Help!!!!

Old Jun 14, 2003 | 03:52 PM
  #1  
jameyab's Avatar
Thread Starter
Registered User
 
Joined: Jun 2003
Posts: 26
From: Statesboro GA
Angry Need Help!!!!

I have a 96 z with long tubes, slp cai, 1.6 rollers, zex nitrous and custom plugs. I have just replace the opti, plugs, wires, and ignition module to remedy this problem but it didn't help. any other suggestions??? Please Help!!!
Old Jun 14, 2003 | 04:09 PM
  #2  
joeSS97's Avatar
Registered User
 
Joined: Jun 2001
Posts: 1,781
From: Detroit area
You need to give a detailed explanation of the problem you are having.
Old Jun 14, 2003 | 04:11 PM
  #3  
jameyab's Avatar
Thread Starter
Registered User
 
Joined: Jun 2003
Posts: 26
From: Statesboro GA
ok, @ low rpms it feels as if the car is running off of 4 or 5 cylinders but after i punch the gas it jerks and feels like normal. also it seems to do worse after the motor warms up. It idles really rough and it keeps doing that until I give it a lot of gas.
Old Jun 14, 2003 | 04:15 PM
  #4  
joeSS97's Avatar
Registered User
 
Joined: Jun 2001
Posts: 1,781
From: Detroit area
Any codes?Did you repace your coil and coil wire?Or the O2 sensors?Those would be my first guesses.
Old Jun 14, 2003 | 04:19 PM
  #5  
jameyab's Avatar
Thread Starter
Registered User
 
Joined: Jun 2003
Posts: 26
From: Statesboro GA
well, I did a conversion about 6 months ago to obdI and the coil wire was replaced with the spark plug wires. I didn't think it would be the coil because of only 2 or 3 cylinders dropping. That would be the next thing i replaced though. I also unpluged the mass air flow to send it into air density mode to see if the mass air was the problem.


Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:24 AM.