I was at the Chevy-Ford-Mopar Cajun Street Car Nationals at No Problem Raceway today.

I noticed a guy in a 4th Gen, so of course I felt obliged to go talk to him

Anyway, long story short, his Z28 was going 11.3x @ 116ish on
CNC LT4 Heads
Crane 210/224 cam
4500 Stall Vigilante (1.4x 60')
TH-350 Tranny
Stock Bottom-End


Dayum!

Mike

 

my roomate went 11.31@ 121

 

Wasnt Chris B in that area too?

 

C/stock automatic guys have been running low 10's in the 4th gen stuff for a long time...

Stock heads, valvejob, stock lift cam...

Just depends on what you're willing to spend and put up with

 

Chris B is the person Jordon is talking about

Mike

 

Yeah, but those guys have like 260/270 cams @ .050", 5.13 gears, 5500 stalls, etc.


I was amazed at the combo he had vs. the times he ran more than anything else... A 210/224 Crane cam doing that well?

....damn...

Mike

 

Does Chris B have a site? I am interested in that. I want to be fast one day.

 

DOH!:smacks head: I should have figured.

 

Doesn't Frank95Z run 11.4x with the 210/224 cam too but with stock heads and a 3200 converter?

 

Thanks Grease I went 11.42 116.5 with 1.49 60ft with stockheads and not a stock eliminater car. I can go to the grocery store in mine. Frank95z

 

i don't wanna hijack the thread, but what the heck, it's worth a shot.

does anybody have any idea what the best ET is for an NA, stock bottom end 6 speed?

 

Got any idea what the race wieght was on those car?

Oh and I do not include balanced and blue printed bottom ends like many do

 

Frank, what does your car weigh in at? Also, do you have a site with all your mods. Thanks.

 

My car weighs 3330 with me in it. I have stock suspension with swaybars removed and mods that are in sig. My bottomend is not blueprinted because my heads have been on since they were installed by Chevy in 1995 Also on www.thunderacing.com under customer cars(Frank Benoit) there is a picture of my car with a list of mods. But I don't think that they ever updated my times. If the car that was running 11.30's with CNC heads is Cody Kern he is running my spare computer Cody has a good running car also. Frank95z

 

The car was that crazy light purple/grey color offered in the early 4th gens and was driven by a young guy who said he has about 700 passes on the motor and is waiting to drop his new 396 in.. The car has a one-of-a-kind exhaust system on it, which has four small pipes coming out in front of each rear tire.

How's Ma' Bell treating ya?

Mike