motor mounts
03-17-2004, 08:40 AM
#1
Registered User
Thread Starter
Join Date: Oct 2000
Posts: 201
motor mounts
I want to change my motor mounts but was wondering if this can be done with the log tubes still on the car, I was hoping I wouldnt have to remove the hookers for this?
Anyone ever swap out the mount with the headers still on the car?
Anyone ever swap out the mount with the headers still on the car?
03-17-2004, 08:58 AM
#2
Registered User
Join Date: Apr 2001
Location: Toronto, Ontario, Canada
Posts: 369
I just finished removing my motor mounts to do my oil pan gasket on my M6.
Based on these pictures I took... I'm going to say no.
I had MAC headers.
http://superseal.kos.net/extras/IM001032.jpg
Now.... you MAY be able to attempt this from the front bolt, and have somebody hold the rear nuts in place with a universal joint....
Based on these pictures I took... I'm going to say no.
I had MAC headers.
http://superseal.kos.net/extras/IM001032.jpg
Now.... you MAY be able to attempt this from the front bolt, and have somebody hold the rear nuts in place with a universal joint....
Thread
Thread Starter
Forum
Replies
Last Post