LT1 Based Engine Tech 1993-1997 LT1/LT4 Engine Related

mods to reach 13.2

Thread Tools
 
Search this Thread
 
Old Sep 7, 2003 | 06:47 PM
  #1  
gritter's Avatar
Thread Starter
Registered User
 
Joined: Aug 2003
Posts: 389
From: Grand Rapids, MI
mods to reach 13.2

My car is a 1994 trans am lt1 a4. Only mod is flowmaster exhause. I've set a goal of 13.2 in the 1/4 mile. What mods should i do in order tor each this time?Thanks

-Ryan
Old Sep 7, 2003 | 06:53 PM
  #2  
Camaro_Maniac63's Avatar
Registered User
 
Joined: Apr 2003
Posts: 880
From: Land O Lakes, FL
I will say CAI, headers, 3.73 gears + sticky tires should get you there, assuming that track conditions are somewhat OK.
Old Sep 7, 2003 | 06:53 PM
  #3  
Zack's Avatar
Registered User
 
Joined: Apr 2002
Posts: 2,310
From: Glendale, Ca
long tube headers, cutout, CAI, gears
Old Sep 7, 2003 | 06:56 PM
  #4  
Rodrigues's Avatar
Registered User
 
Joined: Mar 2002
Posts: 1,842
From: Bloomfield Hills MI
It took me heads, cam and headers
Old Sep 7, 2003 | 07:00 PM
  #5  
NAZTLT1's Avatar
Registered User
 
Joined: Feb 2002
Posts: 174
From: Cincinnati, Oh U.S.A.
Yep cai, longtubes, gear and maybe a little tuning. Watched a guy in my local fbody club run 13.07 with those mods with his car running hot yesterday.
Old Sep 7, 2003 | 07:42 PM
  #6  
TreySpeed's Avatar
On permanent vacation
 
Joined: Aug 2003
Posts: 520
From: Michigan is a decent state.
long tubes
catback
3.73

2.0 60ft
Old Sep 7, 2003 | 07:53 PM
  #7  
edg1957's Avatar
Registered User
 
Joined: Mar 2002
Posts: 264
From: Honolulu, Hawaii
Teaxn Mutt and IllusionalTA are both in the high 12's with their LT1's, Texan uses a hot cam, ported heads, LT's, cutout, custom y pipe, electrical water pump, CAI, and a big throttle body. Illusional TA is an all bolt on LT with a 4:10 Moser rear, ET slicks, and some suspension work. Sp either way, low 13's will cost 2k or more to make. Good luck!

Ed
Old Sep 7, 2003 | 07:59 PM
  #8  
94formulabz's Avatar
Registered User
 
Joined: Apr 2003
Posts: 1,591
From: PA
Originally posted by edg1957
either way, low 13's will cost 2k or more to make. Good luck!

Ed
ok, so i have a M6, but low 13s cost me 1200. Time and mods in the sig before the cam got me to 13.2 in 90 deg weather. Shop around for some used headers and stuff like that .
Old Sep 7, 2003 | 08:09 PM
  #9  
blueirocz-28's Avatar
Registered User
 
Joined: May 2002
Posts: 133
From: waynesville, ohio
uh guys, i don't think he'd need lt's to do 13.2's i'm just pulled a 13.0 at 106 on cai, lt's, 3 inch custom y w/ cutout, and underdrives and some tuning. the car had high twelves in it, but the lt's burnt my pass side o2 wires right after the 13.0 run.

i'm the guy naztlt1 was talkin about.

Last edited by blueirocz-28; Sep 7, 2003 at 08:12 PM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mikes 1994 z28
Drivetrain
1
Oct 10, 2015 07:55 AM
95z_28_camaro_4_Ivan
General 1967-2002 F-Body Tech
13
Oct 3, 2015 07:27 PM
DelSoto
Forced Induction
4
Sep 19, 2015 05:31 AM
13qtr
LT1 Based Engine Tech
23
Jul 19, 2015 05:30 PM
CARiD
2010 - 2015 Camaro Interior, Exterior, Paint & Body, Electronics/Car Audio
0
Jul 7, 2015 08:19 AM




All times are GMT -5. The time now is 12:40 AM.