Meziere replacement-doesnt lose coolant?
Banned
Joined: May 2003
Posts: 6,661
From: LA (lower Alabama)
Re: Meziere replacement-doesnt lose coolant?
Originally Posted by bdc95ta
Here's the second email after me asking if they had a pump they recomend/ could sell me?
Brandon....................unfortunately, we don't make a pump for the LT-1,
due to the low volume of those motors made, we just didn't have a market. I
suggest just getting a good stock one from Chevy or a check out one from
Jegs or Summit. A stock Chevy one will work just fine with our
coolant.......................Tom
----- Original Message -----
From: <brandondavid@houston.rr.com>
To: "Tom Gondal" <tech@evanscooling.com>
Sent: Tuesday, June 27, 2006 1:48 AM
Subject: Re: switching to evan's NPG+
>
> do u have a belt driven pump that will work for my car? If so I'll
> take it.
> -brandon
Brandon....................unfortunately, we don't make a pump for the LT-1,
due to the low volume of those motors made, we just didn't have a market. I
suggest just getting a good stock one from Chevy or a check out one from
Jegs or Summit. A stock Chevy one will work just fine with our
coolant.......................Tom
----- Original Message -----
From: <brandondavid@houston.rr.com>
To: "Tom Gondal" <tech@evanscooling.com>
Sent: Tuesday, June 27, 2006 1:48 AM
Subject: Re: switching to evan's NPG+
>
> do u have a belt driven pump that will work for my car? If so I'll
> take it.
> -brandon
Yep, a stock one will work OK but what do ya do if ya want the extra 8/10HP? Ya don't HAVE to put on an EWP,I did for that 8/10HP and have had no trouble,likewise with a few of my builds that are running them.
Banned
Joined: May 2003
Posts: 6,661
From: LA (lower Alabama)
Re: Meziere replacement-doesnt lose coolant?
Originally Posted by bdc95ta
how much was the griffin rad u stuck in, what's the part #?
thanks
-b
thanks
-b
Thread
Thread Starter
Forum
Replies
Last Post
Formula Steve
LT1 Based Engine Tech
45
Sep 19, 2023 08:31 AM
95z_28_camaro_4_Ivan
General 1967-2002 F-Body Tech
13
Oct 3, 2015 07:27 PM