Manual Trans Swap
#1
Manual Trans Swap
I am going to be putting a rebuild worldclass t-5 trans in my 93 camaro z28. There are a few things I just wanted to make sure of...
I could use a bell housing from a 82-92 camaro. Its got a 700r4 in it now...so I am assuming that they are the same.
A 5 or 6 speed consol out of this year car would work in my car.
Can I use a 82-92 flywheel...or do I have to get one specific to an lt1?
If there is anything I am missing...Please fill me in. I no how to weld....so if the crossmember wont bolt up...its no big deal.
I could use a bell housing from a 82-92 camaro. Its got a 700r4 in it now...so I am assuming that they are the same.
A 5 or 6 speed consol out of this year car would work in my car.
Can I use a 82-92 flywheel...or do I have to get one specific to an lt1?
If there is anything I am missing...Please fill me in. I no how to weld....so if the crossmember wont bolt up...its no big deal.
Thread
Thread Starter
Forum
Replies
Last Post
5.7L 00 SS
Drag Racing Technique
1
08-05-2002 01:19 PM